Technique or
Approach
|
Description
|
Inset Brass Tube
Picture Link
|
Threaded brass bushing with a brass
threaded cap
|
Turned Threaded Caps and a thread hole
@ one end of the board
Picture Link
|
This is the approach I use. I get my dowels,
and thread making supplies for this
approach from the Beall Tool Company
|
Small sliding Dovetail Drawer
on the bottom of the board
Picture Link
|
Sliding dovetail drawer with matching
magnets to hold it in place.
|
Cribbage Board Box
Picture Link
|
The entire crib board acts as storage unit -
for the pegs, cards, etc.
|
Peg Holes in the Side of the Board
|
Drill uniform tapered holes in the side of
the board and stick the pegs in
|
Key Hole Type Storage
Picture Link
|
Cut a keyhole type slide recess on the
bottom of the board, drill out the peg
storage with a forstner bit and then secure
hole with a metal slide
|
Metal Slide Underneath the Board
<< TBD>>
|
|
